[eq-dev] eqOSG on two nodes

[Mehmet Fatih Uluat]

Hello Stefan,
I modified the config file for wall with other points you mentioned, but
stil no luck :(. 
This time I can not see anything on kanalSol1 and kanalSag1.
To be clear, what I try to do is a wall which has a 180 degree view through
`kanalSol1 + kanalSol2 + kanalSag1 + kanalSag2`(i.e. monitors are placed
next to each other).
Thanks in advance.

-----Original Message-----
From: eq-dev-bounces at equalizergraphics.com
[mailto:eq-dev-bounces at equalizergraphics.com] On Behalf Of Stefan Eilemann
Sent: Friday, March 13, 2009 3:57 PM
To: Equalizer Developer List
Subject: Re: [eq-dev] eqOSG on two nodes


On 13. Mar 2009, at 13:49, mfuluat wrote:

> I would like to generate a 180 degree view with two nodes which have 
> one video card an two outputs respectively; totally four outputs. I 
> prepared following configuration but when I used it; both left and 
> right windows generate same two view in each node. What might be the 
> problem?

You have to define viewports for your channels, right now you have two
full-window channels per window, so the last one wins and overwrites the
previous channel rendering. The attached config remaps your config to a
single window, which does the job.

> By the how can I generate achieve same 180 with wall configuration?

You define your total wall size so that your distance to the wall is
wall_width/2.


HTH,

Stefan.




-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2Node4ViewProjection.eqc
Type: application/octet-stream
Size: 1568 bytes
Desc: not available
Url : http://www.equalizergraphics.com/pipermail/eq-dev/attachments/20090313/66ebbd31/attachment.obj