[eq-dev] eqOSG on two nodes

[Mehmet Fatih Uluat]

Hi Stefan,
I made the changes you mentioned, in fact I add another node with three
windows 
to obtain 360 view in wall configuration, but still no 360 view :(.
I attached the configuration and also add an illustration of setup that I
want to execute.
In illustration red part corresponds to front left channels, green parts
front right channels and
blue ones are back channels.


-----Original Message-----
From: eq-dev-bounces at equalizergraphics.com
[mailto:eq-dev-bounces at equalizergraphics.com] On Behalf Of Stefan Eilemann
Sent: Friday, March 13, 2009 3:57 PM
To: Equalizer Developer List
Subject: Re: [eq-dev] eqOSG on two nodes


On 13. Mar 2009, at 13:49, mfuluat wrote:

> I would like to generate a 180 degree view with two nodes which have 
> one video card an two outputs respectively; totally four outputs. I 
> prepared following configuration but when I used it; both left and 
> right windows generate same two view in each node. What might be the 
> problem?

You have to define viewports for your channels, right now you have two
full-window channels per window, so the last one wins and overwrites the
previous channel rendering. The attached config remaps your config to a
single window, which does the job.

> By the how can I generate achieve same 180 with wall configuration?

You define your total wall size so that your distance to the wall is
wall_width/2.


HTH,

Stefan.




-------------- next part --------------
A non-text attachment was scrubbed...
Name: resim.jpg
Type: image/jpeg
Size: 48555 bytes
Desc: not available
Url : http://www.equalizergraphics.com/pipermail/eq-dev/attachments/20090313/d1c8b29c/attachment-0001.jpg 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Config.eqc
Type: application/octet-stream
Size: 3103 bytes
Desc: not available
Url : http://www.equalizergraphics.com/pipermail/eq-dev/attachments/20090313/d1c8b29c/attachment-0001.obj